Function: Products simply fixed with plaster dabs or nails. Edgees, arrises, corners, joints and abutments all easier to form. Designed to minimised potential chipping, cracking and associated damage. Material: 0.45mm stainless steel; 0.45mm galvanized steel Size:
Mesh size (SWD*LWD)
* Flange size can be designed according to your requirement. Installation: Installation usually achieved by pressing the wings firmly into plaster dabs placed at approximately 600mm centres both sides of the arris. The wings may alternatively be embedded into the first coat of plaster for normal teo-coat work. Alignment of butt joints may be assisted by the application of headless nails or wire of similar material within the nosing, and fixing to metal lathing may also be made with wire of similar material. Beads may be cut to size as required by using a hacksaw and snips. Beads should be stored off the fround and in dry conditions duting site work.
For single coat plaster application including dry wall, block and slab work. Provides excellent viscosity and reinforcements.
Packaging & Shipping
Within the limits of what hereinafter set forth, ANBER undertakes to remedy all defects of the equipment attributable to its engineering, material and workmanship. Such obligation of ANBER is limited to defects that show within 12 (twelve) months from the delivery of the equipment. To benefit from these rights, Buyer shall notify within 8 days of its discovery to ANBER, in writing, analytically and precisely, all shown defects.
Installation and commissioning
Machine is installed and commissioned by ANBER technicians. Testing cost, travel, accommodation and meal expenses are payable by the customer, the customer will provide local engineers and staff to support the installation.