in bulk container or according to the customer's requirement
2.5 months or according to our order list
The chain link fence machine is welded of high quality steel and channel steel with PLC control. Its knife molds has high hardness to ensure the stability and beauty of the network and it has high cutting precision with easy operation. The chain link machine using either galvanized wire or PVC coated wire materials. It can produce both standard and compacted rolls by the adjustment in the coiling speed.
Width scope of weaving
Width of net
2, 3, 4m
Diameter of wire
1.8-4 mm (depend on the mesh size)
Speed of the axle of shaped knife
275-1100 rpm (variable speed)
Seven motor, one 3.0KW, one 1.5KW, two 0.75KW, one 0.55KW and two 0.12kw
Actual output is related with the mesh opening size.
Suitable wire to the machine
Galvanized wire, drawn wire, steel wire, PVC wire
Mesh opening size
Weight of equipment
One side or both sides of the end of the net hole is twisted or with burr in edge
Chain link fence:
Material: Hot-dip galvanized iron wire, galvanized iron wire
Application: Chain link fences are mainly used as isolation screen and protection system for expressway and railway, protective fences for rivers, playground and gardens, mines, fences for security for residential buildings and commercial sites.
Packaging & Shipping
Within the limits of what hereinafter set forth, ANBER undertakes to remedy all defects of the equipment attributable to its engineering, material and workmanship. Such obligation of ANBER is limited to defects that show within 12 (twelve) months from the delivery of the equipment. To benefit from these rights, Buyer shall notify within 8 days of its discovery to ANBER, in writing, analytically and precisely, all shown defects.
Installation and commissioning
Machine is installed and commissioned by ANBER technicians. Testing cost, travel, accommodation and meal expenses are payable by the customer, the customer will provide local engineers and staff to support the installation.